Today a friend asked me, how to adjust the limit of the tubular motor, this is indeed a common problem in life, especially when your electric door accidentally blocks the glass door, then the motor travel limit will be messed up, you must reset the limit, otherwise the door to the top light is not stop, heavy reverse caused the door body to fall off, the door piece scrapped, that is a big project, to spend a lot of money.
I will talk to you now, how to adjust the stroke limit of the tubular motor in life, I hope to help you a little, if you think I have a good chat, please pay attention to like, thank you in advance!
Let's take the Shifang motor as an example, let's first understand the hole bit map of the upper and lower limit stroke settings of the tubular motor:
Description: (with an adjustment rod, if not, you can use a small hexagonal handle, hardware stores are available)
1. The up and down arrows represent the running direction of the motor
2. The +, - symbols represent subtracting and decreasing strokes
In the figure above, the motor stroke expression means:
The red hole is the rising key, so if you adjust the upper limit, you have to adjust it in the direction of the + sign.
The white hole is the down key, so if you adjust the lower limit, you must adjust it in the direction of the + sign.
Adjustment Tips:
1. Adjust the upper limit first:
In the state of the motor is energized, first press the door opening button of the remote control (usually the upper triangle), watch the door running, if down, adjust the reverse switch of the controller to the other side (generally on the side of the controller),
The first case: now the door goes up normally, and it stops before it reaches the actual limit, this situation is the simplest, insert the adjustment rod into this red hole, turn the adjustment rod in the direction of +, the door keeps rising with your adjustment rod, stop at the appropriate position, at this time the upper limit is complete.
There is also a situation, press the remote control, but the motor rise can not stop what to do, at this time first press the pause button of the remote control, press the close button of the remote control, stop the door in the middle position, and then insert the adjustment rod in the red hole, turn the adjustment rod in the direction of the - number, you can turn a few more turns, and then press the remote control to rise, until the motor automatically stops, the subsequent method is the same, turn the adjustment rod in the direction of +, the door keeps rising with your adjustment rod, stop at the right position, at this time the upper limit is complete.
2. Lower limit adjustment:
In the state of the motor is energized, first press the close button of the remote control (generally the lower triangle), watch the door running, if up, adjust the reverse switch of the controller to the other side, the door goes down, if it has not reached the ideal state to stop, then simple, insert this white hole, turn the adjustment rod in the direction of +, the door with your adjustment rod does not stop rising, to the appropriate position to stop, at this time the lower limit is complete.
There is also a situation, press the remote control, but the electric organ door can not stop what to do, at this time first press the pause button of the remote control, press the remote control door closing button, stop the door in the middle position, and then insert the adjustment rod in the white hole, turn the adjustment rod in the direction of the - number, you can turn a few more turns, and then press the remote control to rise, until the motor automatically stops, the subsequent method is the same, turn the adjustment rod in the direction of +, the door keeps rising with your adjustment rod, stop at the appropriate position, at this time the upper limit is complete.
